大连富仕泵业制造有限公司

CIS系列船用单级单吸离心泵

概述Overview

IS系列单级单吸（轴向吸入）离心泵，供输送液温不超过100℃吸入压力不大于0.3Mpa，最高工作压力不大于1.6Mpa的清水或物理及化学性质类似于清水的液体之用，适用于工业、城市给水排水，亦可用于农田、果园排灌。

CIS型单级船用离心泵其性能参数，适用温度范围，安装尺寸与IS型单级单吸离心泵相同，适用船舶供水及排水。CISR型单级船用热水离心泵其性能参数，安装尺寸与IS型单级单吸离心泵相同，适用船舶锅炉及生活供热水。供输送液温不超过200℃吸入压力不大于0.8Mpa的热水。IS、CIS、CISR型泵结构简单，性能可靠、体积小、重量轻、效率高、噪声低、振动小、气蚀余量低、使用维修方便。IS、CIS、CISR型泵共29个基本型号，上百个规格，但只有四个规格的轴和悬架部件为独立零件，其余全部通用化，通用化程度高达92%以上。

IS pump is a kind of axial suction centrifugal pump with single stage and suction. It is used to deliver clear water and physical or chemical liquid similar to clear water below 100℃，with the suction pressure being less than 0.3Mpa and the most highest working pressure being less than 1.6Mpa. It is widely applied to industries, to city water supply and drain, and also to agricultural and orchard irrigation.

Type CIS marine centrifugal pump is same with IS series pump in the performance data, suit able temperature range and mounting data. It applied to ship water supply and drain. CISR type single-stage centrifugal pump performance parameters of marine water, the installation size and IS type single-stage single-suction centrifugal pump the same applies to the ship boilers and hot water for life. For the transmission fluid temperature does not exceed 200℃ suction pressure of the hot water is not more than 0.8Mpa. IS, CIS ,CISR pump is of （simple structure, reliable performance, small body, light weight, high of efficiency, low noise, tiny vibration, little NPSH and easy maintenance. The series of IS, CIS,CISR pumps have 29 main types and over one hundred sizes, But only four specifications of shaft and suspension parts for independent parts and the rest universal, generalization degree at 92% above.

型号说明：Model explanation （C）ISR 80-65 -160 A（B、C）

（C）IS—（船用）国际标准离心泵The international standard pump (marine)

R—热水Hot water

80—泵进口直径80毫米Suction diameter 80mm

65—泵出口直径65毫米Discharge diameter 65mm

160—叶轮名义直径160毫米Impeller diameter 160mm

A(B、C)—叶轮第1（2、3）次切割Impeller processed with 1（2、3）cutting